HEV控制器硬件在环仿真平台接口电路设计

汽车专业文档范文下载    范文字数:10624,页数:26

HEV控制器硬件在环仿真平台接口电路设计
 摘要：硬件在环仿真作为一种实验手段，具有缩短研发周期，重复性好，节约成本等优点，目前已广泛应用并成为HEV控制器开发的主要手段。将已有的整车模型载入dSPACE中，同时采用实物的电子负载和可编程电源模拟电动机模型，构成硬件在环仿真平台，实现对HEV整车控制器的性能和控制策略的检测。本课题所做的接口电路目的是实现dSPACE与电子负载和可编程电源之间的通讯控制。主要以MC9S12DB128BCPV型MCU为核心，构建周围接口电路，包括A/D转换和D/A转换，CAN通讯，SCI通讯，开关量的输入输出等，最终设计的电路有一定的抗干扰性和稳定性，能够很好的检测控制器的性能和控制策略。
 关键词：HEV控制器，硬件在环仿真，MC9S12DB128BCPV，CAN，D/A转换，接口电路

Abstract: As a means of experiment ，hardware in the loop simulation has many advantages, such as decreasing development time，saving money and well repeatability. At present, it has become a primary means of developing HEV controllers. Loading the existed vehicle models into the dSPACE board, while using physical electronic load and programmable power to simulation motor model, that constitutes the hardware in the loop simulation platform, and realize the testing of the performance and control strategy of the HEV. The aim of the interface circuit we did is to achieve the communication and control between the programmable power, the dSPACE board and the electronic load. Using the MC9S12DB128BCPV as core to build the around interface circuit which include the D / A converter, CAN and SCI Communications, digital input and output, etc. the circuit we design is reasonable and anti-interference. So it can meet the need.
 Keywords: HEV controller, hardware in the loop simulation, HCS12DB128，CAN, D / A converter, interface circuit

目      录
中文摘要 1
英文摘要 2
1  引 言 3
1.1 HILS系统简介 3
1.1.1 基本构成 3
1.1.2 基于dSPACE平台的系统构建方案 4
2. 接口电路的硬件设计 6
2.1 设计目标 6
2.2 模块化设计 6
2.2.1  MC9S12DB128简介及最小系统设计 6
2.2.2 模拟量输入电路 9
2.2.3 开关量输入电路 9
2.2.4 开关量输出电路 10
2.2.5 CAN通讯电路- TJA1050高速CAN收发器 11
2.2.6 D/A转换电路-TLV5608 D/A转换器和LM301AJ8放大器 12
2.2.7 RS-232C总线标准 15
2.2.8 PSI 8000 2U系列可编程电源 16
2.2.9 IT8700系列电子负载 18
2.2.10  报警电路 20
3  软件系统设计 21
结  论 23
谢  辞 24
参考文献 25

 《HEV控制器硬件在环仿真平台接口电路设计》WORD格式全文下载链接