大型抢答器设计

范文编号:JD614  范文字数:5730,页数:21

摘 要

本文抢答器利用8×10键坐标X、Y的不同来确定抢答者的位置，把抢答者位置分为横坐标和列坐标。当抢答者发出信号时，先确定他的列坐标，对列坐标进行扫描记数，选中的为高电平，其他列为低电平，再经过译码器译码，最后送到LED中显示，确定出列坐标位置。然后确定横坐标位置，同样选中的为高电平，未选中的为低电平，用译码器译出X再用LED显示出来，确定出横坐标位置，则利用（X，Y）可以确定抢答者的位置，最后通过RS触发器触发音响控制电路。

关键词：抢答器；译码器；大容量

Abstract

Competition answer Machine in this paper use 8×10 keys and their X,Y data to confirm the respondents’ location which express as different X-coordinate and Y-coordinate. When the respondent sends out signal, first confirm its Y-coordinate, then scan and make notes. The signal which is pitched on ranks high-level inverter, and others low-level inverter. After coding by encoder, the signal finally shows the Y data in LED. Subsequently, confirm the X-coordinate and dispose it, using the same method as Y-coordinate. And then, it can ensure the respondents’ location according to the (X,Y) which just got, spring the sound controller through RS trigger lastly.

Key word: competition answer machine; encoder; high-capacity

目录
1引言 1
2电路原理概述 2
2.1原理框图 2
2.2电路图 2
3按键控制电路 3
3.1独立式键盘及其接口 3
3.2矩阵式键盘及其接口 3
4电源电路设计 5
5计数脉冲产生 6
5.1晶体振荡器 6
6列信号及列显示译码 8
6.1循环计数器 8
6.2列信号的产生 8
6.3列显示译码电路 10
6.4 CD4511工作原理 10
7行信号及行显示译码 12
7.1行信号产生 12
7.2行显示译码电路 12
8七段LED显示电路 13
8.1显示电路的设计 13
8.2七段LED显示器引脚功能 13
9主持人控制电路 14
9.1 RS触发器 14
9.2主持人按钮数据取值依据 15
参考文献 16
致谢 17
附录 18

 《大型抢答器设计》WORD格式全文下载链接