环境噪声测试终端采集传输系统的设计

范文编号:DZXX324  范文字数:17921,页数:54 附电路图，CAD图

环境噪声测试终端采集传输系统的设计
 摘要:目前，我国水体污染和空气污染自动监测己经具有相当的规模和技术，而城市环境噪声的监测方式远远滞后于环保的需要和技术的发展，无法对污染进行及时准确的监测。若噪声监测可以在城市范围内大量布点，并实现无人操作远距离测试，则将大大提高环保监测的自动化程度和工作效率，增强环保部门对噪声污染、噪声超标排放的快速反应能力和监控能力。本范文是基于GPRS技术的环境噪声测试终端采集传输系统的研究与设计，根据课题的实际要求提出了整体设计方案和原理框图。接着从硬件和软件设计两方面对测试终端的设计做了详细的说明。在硬件设计方面，本文从数据采集处理模块设计等方面讨论了测试终端的硬件设计解决方法。在软件设计方面，以W77E58单片机为核心，详细阐述了测试终端的软件设计思想、主流程图、实现相应功能的子流程图以及程序源代码。最后对该系统进行了户外机箱结构的设计。测试终端将噪声数据及时、准确地通过GPRS网络传给环境监督管理部门。为环境噪声监测和治理提供有效的依据，对推动环保领域的技术进步和科技发展具有十分重要的现实意义。
关键词：MCU模块；GPRS模块；电源；机箱

Test collection and transimission terminal system of environmental noise
 Abstract: At present, the auto monitoring of water and atmosphere has possessed quite scope and technique in china. But the method of monitoring urban environment noise lags far behind the needs of environmental protection and technological development, so we unable to timely and accurate monitoring of noise pollution. If the noise monitoring could distribution in a large number within the city and to achieve unmanned operation of remote test, the environmental monitoring department will greatly enhance the degree of automation and efficiency at the same time the environmental protection department will greatly enhance the rapid reaction capability and monitoring capabilities of the noise pollution and excessive noise emissions. This thesis is environmental noise testing terminal research and design, which is based on GPRS technology. Responding to the requirement of the project, this paper offers the scheme and the principle frame. The following elaboration about the design of the terminal detection is given from the angle of software and hardware. For hardware designing, it discusses the designs and the ways of the terminal detection from the data—acquisition module and the GPRS communication module. As for software, it elaborates the main idea of this terminal detection designment, the main flow chart, the corresponding functional flow chart and the source code according to W77E58.Finally I designed the outdoor enclosure structure of the system. The terminal detection will immediately and exactly send the data of noise to some administer department about environment—protecting by GPRS, which will offer effective data for the noise detection and disposal. In addition, it’ll offer effective measure for the noise detection and there is important significance for further development of the technology and science in the field of environment-protecting．

目录
中文摘要 1
英文摘要 2
第一章 绪论 3
1.1课题提出的背景、目的意义 3
1.2国内外研究现状及现实意义 3
1.3设计方案的基本思路 4
1.3.1噪声监测系统结构简介 4
1.3.2噪声监测终端的电路结构简介 5
1.3.3 课题研究的主要内容 6
第二章 环境噪声测试终端采集传输系统的组成及设计 7
2.1测试终端的硬件系统组成及其设计 7
2.1.1测试终端采集传输系统的硬件组成及总体设计原则 7
2.2 测试终端的软件系统组成及其设计 10
第三章 环境噪声测试终端采集传输系统的硬件组成及设计 11
3.1数据采集处理模块设计详细介绍 11
3.1.1 数据采集处理模块的组成及其功能 11
3.1.2 W77E58单片机 11
3.1.3 8通道12位A/D转换器MAX 197 13
3.1.4 3位LED数码管 15
3.1.5时钟芯片 16
3.1.6 6264 17
3.1.7按钮、指示灯 19
3.2 GPRS无线通信模块 20
3.2.1 GPRS简介及其特点 20
3.2.2 继电器 21
3.2.3 GPRS模块 21
3.3 电源电路模块 26
3.3.1开关电源 26
3.3.2集成稳压电源 29
3.3.3 蓄电池 30
3.3.4 电源电路 30
第四章 环境噪声测试终端采集传输系统的软件设计 31
4.1 环境噪声测试终端采集传输系统的主程序流程图 31
4.2数据采集处理软件模块 33
4.2.1通用传声器数据获取 33
4.2.2 数字式传声器数据获取 33
4.2.3 数码管显示电路 35
4.3 GPRS通信软件模块 36
4.3.1 初始化 36
4.3.2 GPRS通信软件的流程图 37
第五章 户外机箱设计及抗干扰技术 39
5.1 户外机箱设计 39
5.2抗干扰技术 40
第六章 结论与展望 42
6.1 结论 42
6.2 展望 43
谢辞 44
[参考文献] 45
附录1：主程序 46
附录2：图清单 53
附录3：表清单 54
附录4：系统电原理图 55
附录5：机箱零件图 56

 《 环境噪声测试终端采集传输系统的设计》WORD格式全文下载链接