往复式防窜仓给料机

范文编号:JX327  所有图纸,外文翻译。范文字数:28238.页数:92

摘    要

      往复式给煤机安装在煤仓下口处，在煤矿井下生产中，设置一定容量的煤仓对于保证消峰平谷和高产、高效是十分必要的。它可以有效地提高工作面采掘设备的利用率，充分发挥运输系统的潜力，保证连续均衡生产。但是，煤仓窜仓事故在我国煤矿经常发生，仅淮北矿业集团所属各煤矿每年就有十几起甚至几十起窜仓事故发生。窜仓事故常造成设备严重损坏，井下停产，当窜仓煤量较大时，还会阻塞巷道，造成运输巷通风不畅，引起瓦斯爆炸等事故。为避免 窜仓的发生，研制了一种带有防窜仓装置的往复式给煤机，替代现在使用的给煤机，保障运输系统和装载系统正常、有序运行，使系统各环节协调一致。
    研制防窜仓装置的最终目的是控制给煤机闸门，使其能在窜仓发生时非常快地关闭，减少水煤流量，以防止和降低窜仓所造成的对人身安全和运输系统的危害。为此，防窜仓装置应能满足两个工作状态，一是给煤机正常工作时对闸门位置的控制，以达到对给煤机给煤量的控制和煤仓中有水时对窜仓事故的预防;二是在窜仓发生时能立即检测到并控制防窜仓装置快速关闭闸门，在窜仓得到有效控制后，可适当调整闸门开度，使仓中的水煤按一定的控制流量排出。防窜仓 装置由动力传动系统和机械执行机构组成，对其性能，要求在正常工作时，能方便地控制防窜仓闸门在任一位置的开度;而在水煤窜仓时，要求系统有快速的响应和动作，防止水煤窜仓
造成大的危害。另一方面，由于给煤机蛔室空间有限，就要求防窜仓装置结构要简单、体积要小，而且动力部分的布置要灵活，在操作上能进行远距离控制。

关键词：煤仓窜仓；给煤机；防窜仓装置

Abstract

      Reciprocating to the installation of the coal bunker under mouth, in mine production, setting of a certain capacity of the coal bunker for ensuring consumer-Pinggu and high-yield, high-efficiency is very necessary. It can be effective in improving the face of mining equipment utilization, and give full play to the potential of the transport system to ensure continuous production balanced. However, the coal bunker channeling warehouses in China coal mine accidents occur frequently. only Huaibei Mining Group owned the mine will annually dozen or even several dozens of warehouses with channeling the accident occurred. Channeling warehouse accidents often caused serious damage to equipment, downhole production, warehouse when channeling coal volumes, but also blocked roadway, Transport roadway caused poor ventilation caused the gas explosion accident. To avoid channeling warehouse, developed a warehouse with anti-channeling devices to the reciprocating coal, alternative to the current use of coal, protect transportation systems and loading system to normal in an orderly fashion, allowing the system to link all coordinated.
Development of anti-channeling devices warehouses The ultimate aim is to control the gate to the coal machine, it can be made at the time of channeling positions very quickly to shut down, Coal reduce water flow to prevent and reduce channeling warehouses caused by the personal safety of the transport system and the harm. To this end, anti-channeling devices warehouse should satisfy two working state, first, to the coal normal working hours to control the location of the gate, to achieve the right to coal to the volume of coal and control bunker with water right channeling warehouse accident prevention; two warehouses in channeling at the time immediately detect and control the anti-channeling devices warehouse closure of the gates fast, effective channeling warehouse control, can be properly adjusted gate opening, the store coal by water must flow control discharges. Anti-channeling devices from warehouses powertrain and mechanical implementation bodies, their performance requirements in the normal working hours, easy access to control anti-channeling the warehouse gate in an open position; Coal and water channeling warehouses, System requirements of a rapid response and action to prevent gas and water channeling warehouses caused severe harm. The other hand, as the coal feeder roundworm room is limited, requires anti-channeling devices warehouse structure should be simple, small size, and dynamic part of the layout to be flexible and can operate in remote control.

Keywords : channeling bunker positions; Coal; Anti-channeling devices warehouse

目    录

第一章 绪论 .........................................................1
1.1 往复式给煤机的发展历史 ...........................................1
1.2 往复式给煤机的用途 ...............................................2
1.3 往复式给煤机的组成及工作原理 .....................................2
1.4 往复式给煤机的特点............................................... 3
1.5 往复式防窜仓给煤机设计目的....................................... 4
第二章往复式给煤机整体设计 ..........................................5
2.1　往复式给煤机整体结构尺寸的确定.................................. 5
2.1.1给煤机箱体尺寸的确定 ............................................5
2.1.2给煤机整体结构布局.............................................. 6
2.2给煤机的受力分析 ..................................................6
2.2.1 往复式给煤机的运行阻力......................................... 6
2.2.2 产生运行阻力的因素及力的计算 ...................................6
2.3 曲柄连杆机构的运动分析........................................... 9
2.4  电机选型........................................................ 10
2.5  减速器选型...................................................... 11
2.6　联轴器选型 ......................................................13
2.7 托辊轴的设计计算 .................................................16
2.7.1  整体布局...................................................... 16
2.7.2 托辊轴的设计与校验............................................. 16
第三章防窜仓执行元件的设计.......................................... 23
3.1　液压系统方案设计 ................................................23
3.1.1　负载分析 ......................................................23
3.1.2　液压系统方案设计.............................................. 24
3.2 液压缸的结构设计 .................................................25
3.2.1 初选液压缸的工作压力 ...........................................26
3.2.2 缸筒的计算与验算 ...............................................26
3.2.3液压缸进、出油口尺寸............................................ 29
3.2.4缸底厚度计算 ....................................................29
3.2.5活塞杆的稳定性验算 ..............................................30
3.2.6 液压缸的其它结构尺寸 ...........................................31
3.2.7 液压缸的性能参数 ...............................................32
3.2.8 液压缸的主要零部件............................................. 33
第四章防窜仓泵站的设计 ..............................................38
4.1　泵站的分类与特点 ................................................38
4.2　本系统的泵站设计................................................ 38
4.2.1　液压系统图的拟定 ..............................................38
4.2.2　液压泵的选型 ..................................................39
4.2.3　泵站电机的选型 ................................................41
4.2.4　联轴器的选型.................................................. 42
4.2.5  蓄能器的选型............................................... ...43
4.2.6　液压元件的选型 ................................................49
4.2.7　油箱的设计计算 ................................................54
4.2.8  管件............................................... ...........55
第五章　往复式给煤机的使用、安装、维护、发展趋势 .....................58
5.1 往复式给煤机使用中存在的问题 .....................................58
5.2 往复式给煤机的改进 ...............................................58
5.3 往复式给煤机的安装 ...............................................59
5.4 往复式给煤机的维护 ...............................................59
5.5往复式给煤机的发展趋势............................................ 62
结  论 ...............................................................64
参考文献............................................... ..............65
附  录............................................................... 66
翻译部分 .............................................................72
英文原文 .............................................................72
中文译文 .............................................................83
致  谢 ...............................................................89

 《往复式防窜仓给料机》WORD格式全文下载链接