|
中文字数:3504,中文页数:7 英文字数:2626页数:9 铸件模子交接面工序系统的空隙和缺口传热机理是通过测量位移和圆柱的和平面铝合金铸件温度测定的。空隙的厚是测量铸造表面和内表面轮廓之间的区别。对于圆柱状管型，开始向外移动后立即倾倒直到凝固基本发生时；对于平面铸件，倾倒后模子开始的移动大大多于铸件，在工件最大厚度出现后相对移动。可以从热膨胀计算出模子的位移。当空隙的厚度不大的时热量主要通过间隙进行热传递。
The formation process of the air gap at the casting-mold interface and the heat transfer mechanism through the gap were investigated by measuring the displacement of, and the temperature in casting and mold for cylindrical and flat castings of aluminum alloys. The thickness of the air gap was measured as the difference between the location of the casting surface and that of the mold inner surface. For cylindrical castings, the mold began to move outward immediately after pouring, while the casting stayed until solidification progressed to a great extent. For flat castings, the mold began to move greatly toward the casting pushing the casting immediately after pouring and moved reversely after a maximum appeared. It was possible to calculate the displacement of the mold by thermal expansion. It was found that when the thickness of the air gap was not large, the heat through the gap was transferred mainly by heat conduction.
|
|
| |
| 上一篇：特写硅的超精磨削 | 下一篇：模具技术及模具工业在中国的发展 |
| 点击查看关于 模具 结合 面的 空气 形成 处理 间隔 换热 机制 的相关范文题目 | 【返回顶部】 |