瓶盖注射模的设计及其虚拟拆装

材料成型及控制工程范文，范文编号:JX1395  范文字数:18895.页数:50

摘   要
 近年来，我国家电工业的高速发展对模具工业，尤其是塑料模具提出了越来越高的要求，注射成型是塑料成型的一种重要方法，它主要适用于热塑性塑料的成型，可以一次成型形状复杂的精密塑件。本范文完成了瓶盖注射模模具的设计及模具的虚拟拆装。
 文档设计过程中主要利用Pro/E、Soldworks和AutoCAD工具软件，充分发挥计算机辅助设计的优越性，实现了模具设计设想。首先分析塑件的结构工艺性，设计单分型面模具结构形式。然后在Pro/E EMX模块中完成了模具成型零部件的推出机构、导向机构、结构零部件和冷却系统等各个机构的3D建模及装配，并在AutoCAD中绘制了整幅模具的二维装配图，最后运用Soldworks中对瓶盖注射模工作及拆装过程设定运动约束，进行虚拟运动演示。总之，所设计的模具结构简单，机构运行可靠，3D设计及虚拟拆装直观明了。对注射模设计及制造有一定的借鉴意义。
 
关键词：瓶盖   注射模   设计   虚拟

Abstract
 In recent years, the development if the household electrical appliance industry at highspeed demands, the mold industry, especial the plastic mold. The injection molding is one most  important moulding method, which is primarily applied to the thermoplastic products. In this paper, the injection mould design for one bottle lid and the virtual reality of the disassembly and the motion for the mold was completed.
 During the design process the Pro/E, AutoCAD and SolidWorks software tools were used, having many advantages of computer-aided design, to achieve the mold design and the virtual reality. First the structure of the plastic parts was analyzed and designed the single-parting surface. And according to the results of these calculations, the Pro/E EMX modules was used to complete the 3D modeling if molding parts and other mold assembles such as the ejection system, the oriented system, the structures parts and the cooling system. And the AutoCAD was used to draw the general assembly and the parts drawing two-dimentional. At last SolidWorks was used to completed virtual reality of the disassembly and the motion of the mold. In a word, the injection mold structure is simple..And the mechanism is reliable, the 3D design and virtual disassembling being ocular and clear
 Keywords： Bottle Lid; Injection Mould; Design; Virtual
目  录
摘   要 i
Abstract ii
目  录 iii
第一章  绪论 1
 1.1  注射模的应用现状 1
 1.2  注射模中CAD/CAE/CAM的主要工作内容 2
 1.3  课题的提出及主要内容的研究 3
第二章  瓶盖注射模的设计及计算 4
 2.1  引言——注射成型的原理 4
 2.2  模具总体结构设计 4
 2.2.1  分型面的选择 5
 2.2.2  标准模架的选取 5
 2.2.3  定模座板、动模座板的设计 5
 2.2.4  合模导向机构的设计 6
 2.3  瓶盖注射模的设计与计算 6
 2.3.1  型腔数目的确定 7
 2.3.2  浇注系统的设计 7
 2.3.3  成型零部件的设计 9
 2.3.4  推出机构设计 11
第三章  塑料瓶盖的3D建模 13
第四章  瓶盖注射模的3D的设计 17
 4.1  调入瓶盖三维模型 17
 4.2  成型零部件工件的创建及收缩率的设置 19
 4.3  创建分型面 20
 4.4  成型零部件体积块分割 23
 4.5  创建浇注系统 24
 4.6  生成凹模，型芯和注射成型瓶盖 28
 4.8  模架设计 31
第五章  瓶盖注射模工作及拆装过程的虚拟演示 42
 5.1  瓶盖注射模工作过程的虚拟演示 42
 5.2  瓶盖注射模拆装过程的虚拟演示 43
第六章  结论 44
参考文献 45
致  谢 46

 《瓶盖注射模的设计及其虚拟拆装》WORD格式全文下载链接