某高层大厦建筑电气设计

范文编号:ZD908    范文字数:20258,页数:36

 摘要
 随着经济建设的发展，中国当前城市建设发展迅速，其规模之大、范围之广，均是空前的。由于建筑技术和信息技术的相互渗透结合和迅猛发展，在20世纪80年代中期产生了新的建筑类型——智能建筑。本设计是某高层大厦建筑电气设计。
 本工程为地上11层高档住宅，地上全部为住宅。顶层住宅带有阁楼。占地面积约为600平方米，每层层高为3m。室内外高差为0.45m。本工程为一类建筑，三级级负荷供电，三级防雷等级，消防系统及部分重要负荷（如电梯）采用双电源同时供电，电源由小区变电站引来，三相五线制，采用TN-C-S系统，采用树干式配电方式至各分配电箱。再通过放射式至各层配电箱。
 设计包括：供配电系统设计，建筑照明设计，插座布置，防雷与接地，有线电视系统设计，综合布线系统设计，电话系统以及可视对讲系统。重点是强电，主要设计该工程的配电系统和动力照明系统。

关键词：  建筑电气；照度；布线；负荷计算

  
 Abstract
With the development of economic construction, the construction and development of present city of China are fast, its scale big, range is wide, is unprecedented. Technique permeate the combination mutually with the information because of the building technique with fast and fierce development of building electricity technology, in 1980’s age the period the new building type-intelligent buildings turned out. This design is a floor area of a certain electrical system design.
For ground house not top-grade of 12 layers in project floors in this, all house above the ground. The floor space is about 600 square meters；It is that each layer is high.3 m. The internal and external discrepancy in elevation of the room is 0. 45m. This engineering is two buildings, and carry to adopt the double the power supply the power supply, power supply to come from the transformer substation for second class burthen power supply, fire fight system and part of importance at the same time, three modulation four line system, adoption TN-C-S System ，adoption tree trunk type contribution electricity the method give or get an electric shock the box to each allotment.
Design and include: For the distribution system to design, the building illumination is designed, the socket is fixed up, defending Ray and earth, the cable television system is designed, the comprehensive wiring system is designed, telephone system and can look at system of talk backing. The focal point originally designed is the strong electricity, design the distribution system of this project and motive force lighting system mainly.
 
 
Key word: Electrical construction；Lighting ；Wiring ；Load calculation

 
 
 目录

摘要 1
Abstract II
1 绪论 1
2 建筑供配电的负荷计算 3
2.2供配电的计算参数 5
2.3计算过程 5
3配电系统设计 8
3.1 住宅配电设计要求 8
3.2 配电线路的保护 8
3.3 配电回路及其保护措施方案选择 8
3.4 本设计具体配电方案 9
3.5 电能计量方式选择 10
4照明系统设计 11
4.1 住宅各部分照明对设计的要求 11
4.2 灯具的选择 12
4.3 照明开关的选择 12
4.4 以往插座系统设计的现状及其存在的问题 13
4.5 本设计的设计方案 13
4.6 照明设计的计算 14
5 防雷接地系统设计 17
5.1 接地内容与设计方案 17
5.2 防雷内容与设计方案 18
6  弱电系统设计 21
6.1电话通讯系统设计 21
6.2 有线电视系统设计 22
6.3 信息网络系统设计 22
6.4 门禁系统设计 22
7 消防系统的设计 24
7.1 消防系统的概述 24
7.2 火灾报警系统 24
7.3消防控制室的设置 25
7.4 火灾探测器的计算 25
7.5 应急照明 27
8  结论 29
致谢 30
参考文献 31

 《某高层大厦建筑电气设计》WORD格式全文下载链接